- No maintenance, sealed and non-greasable spindles; 7.75″-diameter cutter housing with 25mm (.98″) diameter spindle shaft and splined blade driver
- Drive tires 24 x 12-12
- Unibody, welded, heavy-duty 1.5″ x 3″ tubular steel frame
- Hydraulically dampened twin levers steering control system
- Front caster tires 13 x 6.5-6, smooth-tread, semi-pneumatic
- Lever-actuated disc brake parking brake design
- Deluxe, two tone, bolstered suspension seat with elastomeric vibration control material
- Electrical 12-volt battery with 15-amp alternator.
- Engine hour meter and cup holder
- Heavy-duty canister air filtration system
- Electronic sender fuel indicator
- Foot-controlled deck lift to change cutting height and lifts the deck to maneuver around obstacles, or place in transport position
- Operator presence controls (OPC) and drive system interlock, with safety interlock system indicators
- Full-floating ultraCut deck 72″ with side discharge standard
- Kawasaki v-twin FX801V
- Engine displacement 852
- Engine speed 3,750 RPM
- Fuel capacity 12-gallon (45.4-L) single fuel tank with single fill location
- Speed infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
- Blade tip speed approximately 18,500 fpm.
- Cutting heights 1.0″ (2.5 cm) to 5.5″ (11.8 cm) in 0.25″ (0.64 cm) increments adjustable from operator’s seat.
- 3 blades at 24.5″ length
- Width 78.2 in. (198.6 cm)
- Length 86.1 in. (218.7 cm)
- Height 70.5 in. (179.1 cm)
- Curb weight 1359
- No maintenance, sealed and non-greasable spindles; 7.75″-diameter cutter housing with 25mm (.98″) diameter spindle shaft and splined blade driver
- Drive tires 24 x 12-12
- Unibody, welded, heavy-duty 1.5″ x 3″ tubular steel frame
- Hydraulically dampened twin levers steering control system
- Front caster tires 13 x 6.5-6, smooth-tread, semi-pneumatic
- Lever-actuated disc brake parking brake design
- Deluxe, two tone, bolstered suspension seat with elastomeric vibration control material
- Electrical 12-volt battery with 15-amp alternator.
- Engine hour meter and cup holder
- Heavy-duty canister air filtration system
- Electronic sender fuel indicator
- Foot-controlled deck lift to change cutting height and lifts the deck to maneuver around obstacles, or place in transport position
- Operator presence controls (OPC) and drive system interlock, with safety interlock system indicators
- Full-floating ultraCut deck 72″ with side discharge standard
- Kawasaki v-twin FX801V
- Engine displacement 852
- Engine speed 3,750 RPM
- Fuel capacity 12-gallon (45.4-L) single fuel tank with single fill location
- Speed infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
- Blade tip speed approximately 18,500 fpm.
- Cutting heights 1.0″ (2.5 cm) to 5.5″ (11.8 cm) in 0.25″ (0.64 cm) increments adjustable from operator’s seat.
- 3 blades at 24.5″ length
- Width 78.2 in. (198.6 cm)
- Length 86.1 in. (218.7 cm)
- Height 70.5 in. (179.1 cm)
- Curb weight 1359
